What to Check When Your Used Auto Part Arrives

Your part just showed up. Before you grab the tools and start the install, take a few minutes to check it over. A quick inspection now can save you time, frustration, and a second trip under the vehicle later.
Check the box before you open it
Look at the packaging when it arrives. If the box is crushed, torn, or wet, take photos before you open it. If there's any shipping damage, those photos will help sort it out quickly.
Compare it to your original part
If you still have the old part, set them side by side. Check the overall shape, mounting points, connectors, and any part numbers. For wheels, compare the size, bolt pattern, and design. For body parts, check the shape and the location of clips and holes.
Look for damage
Give the part a careful once-over. Depending on the part, look for:
Cracks, bends, or dents
Broken tabs, clips, or mounting points
Damaged connectors or wiring
Curb rash or bends on wheels
Some cosmetic wear is normal on a used part, so compare what you see to what was described when you ordered.
Confirm it's the right side and position
It sounds simple, but it's one of the most common mix-ups. Make sure a driver side part didn't get swapped for a passenger side part, or front for rear, before you start the install.
Don't modify it before you're sure
If anything looks off, stop before you cut, drill, paint, or install. Once a part has been modified or installed, it may be harder to return or exchange. Reach out to the supplier first.
Keep your paperwork
Hang on to your invoice, order number, and any photos until the repair is done and everything is working the way it should.
Questions about your part?
If something doesn't look right, contact Rubicon Automotive Group at (541) 646-7747 before installing. We're happy to help you confirm you've got the right part for the job.
This article was written by Two Four Media on behalf of Rubicon Automotive Group for general information and marketing purposes. Every vehicle and repair is different, so contact Rubicon Automotive Group at (541) 646-7747 for help with your specific part.




Comments